Using the TFX Command-line Interface¶
The TFX command-line interface (CLI) performs a full range of pipeline actions using pipeline orchestrators, such as Kubeflow Pipelines, Vertex Pipelines. Local orchestrator can be also used for faster development or debugging. Apache Beam and Apache airflow is supported as experimental features. For example, you can use the CLI to:
- Create, update, and delete pipelines.
- Run a pipeline and monitor the run on various orchestrators.
- List pipelines and pipeline runs.
Note
The TFX CLI doesn't currently provide compatibility guarantees. The CLI interface might change as new versions are released.
About the TFX CLI¶
The TFX CLI is installed as a part of the TFX package. All CLI commands follow the structure below:
The following command-group options are currently supported:
tfx pipeline
- Create and manage TFX pipelines.tfx run
- Create and manage runs of TFX pipelines on various orchestration platforms.tfx template
- Experimental commands for listing and copying TFX pipeline templates.
Each command group provides a set of commands. Follow the instructions in the pipeline commands, run commands, and template commands sections to learn more about using these commands.
Warning
Currently not all commands are supported in every orchestrator. Such commands explicitly mention the engines supported.
Flags let you pass arguments into CLI commands. Words in flags are separated
with either a hyphen (-
) or an underscore (_
). For example, the pipeline
name flag can be specified as either --pipeline-name
or --pipeline_name
.
This document specifies flags with underscores for brevity. Learn more about
flags used in the TFX CLI.
tfx pipeline¶
The structure for commands in the tfx pipeline
command group is as follows:
Use the following sections to learn more about the commands in the tfx
pipeline
command group.
create¶
Creates a new pipeline in the given orchestrator.
Usage:
tfx pipeline create --pipeline_path=pipeline-path [--endpoint=endpoint --engine=engine \
--iap_client_id=iap-client-id --namespace=namespace \
--build_image --build_base_image=build-base-image]
- --pipeline_path=
pipeline-path
- The path to the pipeline configuration file.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint when using Kubeflow Pipelines.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
. - --build_image
-
(Optional.) When the
engine
is kubeflow or vertex, TFX creates a container image for your pipeline if specified.Dockerfile
in the current directory will be used, and TFX will automatically generate one if not exists.The built image will be pushed to the remote registry which is specified in
KubeflowDagRunnerConfig
orKubeflowV2DagRunnerConfig
. - --build_base_image=
build-base-image
-
(Optional.) When the
engine
is kubeflow, TFX creates a container image for your pipeline. The build base image specifies the base container image to use when building the pipeline container image.
Examples¶
Kubeflow:
tfx pipeline create --engine=kubeflow --pipeline_path=pipeline-path \
--iap_client_id=iap-client-id --namespace=namespace --endpoint=endpoint \
--build_image
Local:
Vertex:
To autodetect engine from user environment, simply avoid using the engine flag like the example below. For more details, check the flags section.
update¶
Updates an existing pipeline in the given orchestrator.
Usage:
tfx pipeline update --pipeline_path=pipeline-path [--endpoint=endpoint --engine=engine \
--iap_client_id=iap-client-id --namespace=namespace --build_image]
- --pipeline_path=
pipeline-path
- The path to the pipeline configuration file.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
. - --build_image
-
(Optional.) When the
engine
is kubeflow or vertex, TFX creates a container image for your pipeline if specified.Dockerfile
in the current directory will be used.The built image will be pushed to the remote registry which is specified in
KubeflowDagRunnerConfig
orKubeflowV2DagRunnerConfig
.
Examples¶
Kubeflow:
tfx pipeline update --engine=kubeflow --pipeline_path=pipeline-path \
--iap_client_id=iap-client-id --namespace=namespace --endpoint=endpoint \
--build_image
Local:
Vertex:
compile¶
Compiles the pipeline config file to create a workflow file in Kubeflow and performs the following checks while compiling:
- Checks if the pipeline path is valid.
- Checks if the pipeline details are extracted successfully from the pipeline config file.
- Checks if the DagRunner in the pipeline config matches the engine.
- Checks if the workflow file is created successfully in the package path provided (only for Kubeflow).
Recommended to use before creating or updating a pipeline.
Usage:
- --pipeline_path=
pipeline-path
- The path to the pipeline configuration file.
- --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
Examples¶
Kubeflow:
Local:
Vertex:
delete¶
Deletes a pipeline from the given orchestrator.
Usage:
tfx pipeline delete --pipeline_path=pipeline-path [--endpoint=endpoint --engine=engine \
--iap_client_id=iap-client-id --namespace=namespace]
- --pipeline_path=
pipeline-path
- The path to the pipeline configuration file.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Examples¶
Kubeflow:
tfx pipeline delete --engine=kubeflow --pipeline_name=pipeline-name \
--iap_client_id=iap-client-id --namespace=namespace --endpoint=endpoint
Local:
Vertex:
list¶
Lists all the pipelines in the given orchestrator.
Usage:
tfx pipeline list [--endpoint=endpoint --engine=engine \
--iap_client_id=iap-client-id --namespace=namespace]
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Examples¶
Kubeflow:
tfx pipeline list --engine=kubeflow --iap_client_id=iap-client-id \
--namespace=namespace --endpoint=endpoint
Local:
Vertex:
tfx run¶
The structure for commands in the tfx run
command group is as follows:
Use the following sections to learn more about the commands in the tfx run
command group.
create¶
Creates a new run instance for a pipeline in the orchestrator. For Kubeflow, the most recent pipeline version of the pipeline in the cluster is used.
Usage:
tfx run create --pipeline_name=pipeline-name [--endpoint=endpoint \
--engine=engine --iap_client_id=iap-client-id --namespace=namespace]
- --pipeline_name=
pipeline-name
- The name of the pipeline.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --runtime_parameter=
parameter-name
=parameter-value
- (Optional.) Sets a runtime parameter value. Can be set multiple times to set values of multiple variables. Only applicable to
airflow
,kubeflow
andvertex
engine. - --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
. - --project=
GCP-project-id
- (Required for Vertex.) GCP project id for the vertex pipeline.
- --region=
GCP-region
- (Required for Vertex.) GCP region name like us-central1. See [Vertex documentation](https://cloud.google.com/vertex-ai/docs/general/locations) for available regions.
Examples¶
Kubeflow:
tfx run create --engine=kubeflow --pipeline_name=pipeline-name --iap_client_id=iap-client-id \
--namespace=namespace --endpoint=endpoint
Local:
Vertex:
tfx run create --engine=vertex --pipeline_name=pipeline-name \
--runtime_parameter=var_name=var_value \
--project=gcp-project-id --region=gcp-region
terminate¶
Stops a run of a given pipeline.
Important Note
Currently supported only in Kubeflow.
Usage:
tfx run terminate --run_id=run-id [--endpoint=endpoint --engine=engine \
--iap_client_id=iap-client-id --namespace=namespace]
- --run_id=
run-id
- Unique identifier for a pipeline run.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Examples¶
Kubeflow:
tfx run delete --engine=kubeflow --run_id=run-id --iap_client_id=iap-client-id \
--namespace=namespace --endpoint=endpoint
list¶
Lists all runs of a pipeline.
Important Note
Currently not supported in Local and Apache Beam.
Usage:
tfx run list --pipeline_name=pipeline-name [--endpoint=endpoint \
--engine=engine --iap_client_id=iap-client-id --namespace=namespace]
- --pipeline_name=
pipeline-name
- The name of the pipeline.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- airflow: (experimental) sets engine to Apache Airflow
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Examples¶
Kubeflow:
tfx run list --engine=kubeflow --pipeline_name=pipeline-name --iap_client_id=iap-client-id \
--namespace=namespace --endpoint=endpoint
status¶
Returns the current status of a run.
Important Note
Currently not supported in Local and Apache Beam.
Usage:
tfx run status --pipeline_name=pipeline-name --run_id=run-id [--endpoint=endpoint \
--engine=engine --iap_client_id=iap-client-id --namespace=namespace]
- --pipeline_name=
pipeline-name
- The name of the pipeline.
- --run_id=
run-id
- Unique identifier for a pipeline run.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- airflow: (experimental) sets engine to Apache Airflow
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Examples¶
Kubeflow:
tfx run status --engine=kubeflow --run_id=run-id --pipeline_name=pipeline-name \
--iap_client_id=iap-client-id --namespace=namespace --endpoint=endpoint
delete¶
Deletes a run of a given pipeline.
Note
Currently supported only in Kubeflow
Usage:
tfx run delete --run_id=run-id [--engine=engine --iap_client_id=iap-client-id \
--namespace=namespace --endpoint=endpoint]
- --run_id=
run-id
- Unique identifier for a pipeline run.
- --endpoint=
endpoint
-
(Optional.) Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --engine=
engine
-
(Optional.) The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --iap_client_id=
iap-client-id
- (Optional.) Client ID for IAP protected endpoint.
- --namespace=
namespace
- (Optional.) Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Examples¶
Kubeflow:
tfx run delete --engine=kubeflow --run_id=run-id --iap_client_id=iap-client-id \
--namespace=namespace --endpoint=endpoint
tfx template [Experimental]¶
The structure for commands in the tfx template
command group is as follows:
Use the following sections to learn more about the commands in the tfx
template
command group. Template is an experimental feature and subject to
change at any time.
list¶
List available TFX pipeline templates.
Usage:
copy¶
Copy a template to the destination directory.
Usage:
- --model=
model
- The name of the model built by the pipeline template.
- --pipeline_name=
pipeline-name
- The name of the pipeline.
- --destination_path=
destination-path
- The path to copy the template to.
Understanding TFX CLI Flags¶
Common flags¶
- --engine=
engine
-
The orchestrator to be used for the pipeline. The value of engine must match on of the following values:
- kubeflow: sets engine to Kubeflow
- local: sets engine to local orchestrator
- vertex: sets engine to Vertex Pipelines
- airflow: (experimental) sets engine to Apache Airflow
- beam: (experimental) sets engine to Apache Beam
If the engine is not set, the engine is auto-detected based on the environment.
Important Note
The orchestrator required by the DagRunner in the pipeline config file must match the selected or autodetected engine. Engine auto-detection is based on user environment. If Apache Airflow and Kubeflow Pipelines are not installed, then the local orchestrator is used by default.
- --pipeline_name=
pipeline-name
- The name of the pipeline.
- --pipeline_path=
pipeline-path
- The path to the pipeline configuration file.
- --run_id=
run-id
- Unique identifier for a pipeline run.
Kubeflow specific flags¶
- --endpoint=
endpoint
-
Endpoint of the Kubeflow Pipelines API service. The endpoint of your Kubeflow Pipelines API service is the same as URL of the Kubeflow Pipelines dashboard. Your endpoint value should be something like:
https://host-name/pipeline
If you do not know the endpoint for your Kubeflow Pipelines cluster, contact you cluster administrator.
If the
--endpoint
is not specified, the in-cluster service DNS name is used as the default value. This name works only if the CLI command executes in a pod on the Kubeflow Pipelines cluster, such as a Kubeflow Jupyter notebooks instance. - --iap_client_id=
iap-client-id
- Client ID for IAP protected endpoint.
- --namespace=
namespace
- Kubernetes namespace to connect to the Kubeflow Pipelines API. If the namespace is not specified, the value defaults to
kubeflow
.
Generated files by TFX CLI¶
When pipelines are created and run, several files are generated for pipeline management.
- ${HOME}/tfx/local, beam, airflow, vertex
- Pipeline metadata read from the configuration is stored under
${HOME}/tfx/${ORCHESTRATION_ENGINE}/${PIPELINE_NAME}
. This location can be customized by setting environment varaible likeAIRFLOW_HOME
orKUBEFLOW_HOME
. This behavior might be changed in future releases. This directory is used to store pipeline information including pipeline ids in the Kubeflow Pipelines cluster which is needed to create runs or update pipelines. - Before TFX 0.25, these files were located under
${HOME}/${ORCHESTRATION_ENGINE}
. In TFX 0.25, files in the old location will be moved to the new location automatically for smooth migration. - From TFX 0.27, kubeflow doesn't create these metadata files in local filesystem. However, see below for other files that kubeflow creates.
- Pipeline metadata read from the configuration is stored under
- (Kubeflow only) Dockerfile and a container image
- Kubeflow Pipelines requires two kinds of input for a pipeline. These files are generated by TFX in the current directory.
- One is a container image which will be used to run components in the
pipeline. This container image is built when a pipeline for Kubeflow
Pipelines is created or updated with
--build-image
flag. TFX CLI will generateDockerfile
if not exists, and will build and push a container image to the registry specified in KubeflowDagRunnerConfig.